0° Road Bike Cleat Grey The HEPINGJIANGENBO brand designs and
manufactures products for customers with the professional perspective
and the strictest requirements for the broadest range of cycling
enthusiasts. It makes the cleat clip into pedal and disengagement
effective and reassuring. At a Cost-effective and professional quality,
let you focus all your attention on the ride itself. More floater level
and riding habits provide 2 floating options and corresponding colors. The Difference Between 3 ° Cleat And 0 ° Cleat 3 Threaded Holes To Install The Cleat The cleat suitable for three-hole cycling shoes. Technical Specifications Material 85%PC(Polycarbonate);15%GF(Glass fiber) Angular freedom 0° Color Grey Use HEPINGJIANGENBO Road Bike Pedal,compatible with Look Keo's spring-loaded pedals Weight pair + fastenings 77g Accessories 6 SCREWS AND 6 WASHERS PRESENTATION AND ASSEMBLY OF THE CLEATS BOTTOM VIEW 1:Adjustment:the 3 dajustment opening allow fitting the cleat under the
shoe sole.These are rectangular and can be adjusted horizontally and
longitudinally so that the sole can be accurately positioned. 2:Plates(6) 3:Cleat fastening screws(6):they shall be tightened using 4mm Allen wrench. 4:Anti-skid pads: These polyurethane pads control the risk of slipping
while walking. Note: When any one of the anti-skid pads is seriously
worn, it is recommended to replace the new lock piece to achieve the
best use effect. SIDE VIEW: 1. Bending radius: There is a bending radius on the back of the
cleat,providing shoe sole the required camber which is essential to
make shoes comfortable.The soles of shoes used with these cleats shall
also have the same bending radius.otherwise the cleat might get out of
shape after it is fixed and provide inadequate foot support. 2.Axle-pedal mark:this reference mark indicates pedal axle positon when the cleat is inserted in the pedal. Cleat Installation:Caution: make sure
that the cleats are suitably tightened under your shoes before
snapping.After replacing the cleats and before using the bike,always
make sure that pedal spring tension is adequate.If release is too easy
or too difficult,this might result in fall and serious injury.Fasten the
cleat to shoe bottom using screws and plates provided with the cleats. Cleat Adjustment: Step1:Cleat side adjustment:Center the cleat as much as possible under
the shoe(sole fixing holes are located in the centre cleat openings). Step2:Cleat adjustment lengthwise(at front/backend of shoes
bottom).Most experts consider adjustment to be optimal when the
reference mark on the cleat(indicating pedal axle)is located under the
axis of inside metatarsus articulation.The axis of your inside metatasus
articulation is located in the centre section of foot-big toe
articulation. Step3:Once the cleat is adjusted as stated above,fasten it to the shoe
using the fixing screws.Tightening is done using 4mm Allen wrench.The
tightening torque shall be set within 5.5~6 Nm range. Step4:Engage your foot in the pedal and run a few meters with your
bicycle. If your shoes collide with the bike, or your ankles and knees
are unable to exert force or are overburdened, please adjust the
direction of the locking tabs. Repeat this operation until you feel
completely comfortable while riding. ENGAGEMENT/RELEASE Engagement :Insert the cleat in the
pedal in accordance with trajectory 1 and press down on the pedal as per
trajectory 2 to lock the cleat. Release: Rotate your heel towards the outside 3 and it will disengage. WARNING! :Don't release towards the inside,as this may case the heel to touch the spokes and case a crash.
Returns Accepted for this item if it's within 30 Days