Raleigh 1958 Lenton Grand Prix - Reg Harris Edition black - refurbished
This Raleigh Lenton Grand Prix is a vintage
road bike from 1958. The bike has been fully refurbished by our very own
Cap'n Jonny and he describes the process in detail below. Be sure to
check out the hand shifter for the front derailleur! The bike also has
brand-new tires.
With a 57cm effective top tube and a
57cm seat tube (c-c), this bike should fit riders in the height range of
5'10"-6'4". The standover measurement is 33.25". This
classic Raleigh is in Very Good to Excellent overall condition for a
bike of this vintage. There is a very small mark on the seat tube near
where the front mech mounts. There is a very small hole in the seat tube
above the main stickers, we do not know why or how this hole got here.
It seems to have been done very cleanly and could probably use a grommet
to prevent water intake. The small hole does not impede the operation
or performance of the bike. Mechanically, the bike is fully functional
and ready to ride.
***************************
The bike according to Cap'n Jonny:
"Produced
between 1948 and 1960 the Reynolds 531 framed Raleigh Lenton was the
best-selling entry-level Club racer of its day in Great Britton. This
bicycle, a 1958 Lenton Grand Prix, was the first model with derailleur
gearing, using an early Benelux rear with a 4-speed free wheel and
rod-actuated front mech. with 14-24 tooth rear cogs and 46-49 tooth
chainrings. The Bars are a special bend favored by Reg Harris, a cycling
legend of the time."
"When the bike appeared at the
shop it was in pretty rough shape, having been ridden hard for many
years. Someone had covered the original gold paint in red latex,
Installed turkey levers on the brakes, changed the rear derailleur for a
Suntour unit, and installed a vintage track stem."
"Removing
the latex revealed the original Raleigh Super Chromatic Gold paint and
decals. Its poor condition resulted in the decision to repaint. A
company in England had the decals and a set was ordered."
"Having no luck finding a match for the original gold paint, black was selected to show off the beautiful Lenton decals."
"After
stripping the frame to bare metal it was painted with a 2 part primer
and black acrylic enamel, the decals were put on, and a 2 part
polyurethane clear top coat was applied for durability." "With
the goal of keeping everything on the bike period correct if not
original, a pair of beautiful 27” Rigida Chrome rims with Campagnolo
hubs were installed along with 1 ¼” gum walls. A vintage GB stem was
fitted with the Reg Harris bars and the original equipment Weinman
brakes got early model levers. At the rear, a 14-28 tooth 5-speed
Hyperglide style freewheel and Hurret Derailleur made pedaling up hills a
possibility. The original Brooks swallow saddle having disappeared, a
Vintage B 17 took its place."
"The complete bike weighs 28.7 lbs. Not bad for an “all steel” bicycle."
***************************
Frame Material: Reynolds 531 steel
Fork: lugged steel
Drivetrain: 2x5
Brakes: Weinmann Type 730 side-pull calipers (rear), Weinmann 605 (front)
Brake Levers: Weinmann
Shifter: down tube
Front Derailleur: Benelux
Rear Derailleur: Sachs Huret Eco
Handlebar: Reg Harris bars
Stem: GB quill
Saddle: Brooks B17
Wheels: Campagnolo hubs with Campy quick releases(front), Rigida Chrolux rims
Front Tire: Ultracycle 27x1-1/4 (new)
Rear Tire: Ultracycle 27x1-1/4 (new) This bike has been inspected and tuned and the entire bike has been checked over by two mechanics. After re-assembly by a qualified mechanic on the buyer's end, the bike should be ready to ride.
Bike will be professionally packed with care. By bidding on this item, Bidder acknowledges that Bicycle Exchange products are sold AS-IS with no warranty as to the usability or safety of the item . The Bicycle Exchange accepts no liability, and Bidder hereby waives, any claims for damages, injuries, and component failures caused by any manner of use of items purchased. No returns, please bid carefully. Shipping only to 48 states (no AK or HI). Your purchase helps support the Silicon Valley Bicycle Exchange 501c(3) non-profit organization. The Silicon Valley Bicycle Exchange repairs donated bicycles and gives them to economically-disadvantaged children and adults. It funds its operations in part through the sale of used bicycle parts.