BRAND NEW IN PACKAGING/USED/LIGHTLY USED 2012 BMC Impec Carbon Road Bike, Size 55 Performance Fit, Less than 2,000 miles!
Here we have a BMC Impec in beautiful condition with less than
2,000 miles on it. This bike was owned by a local STL bike shop owner,
and he spared no expense on the build so definitely check out the build
list below! Like all bikes sold through our eBay store, this bike will
be
professionally tuned & boxed by our local partner bike shop and
shipped through UPS with tracking sent to the buyer.
Frameset: BMC Impec, Swiss Made Carbon!
Size: 55cm Performance Fit
Upgrades: SLF Motion Hyper Speed Pulley System ($485 value)
Groupset: SRAM Red AXS groupset
Crankset: SRAM Red AXS Power Meter Crankset, 46/33t, 172.5mm
Cassette: SRAM Red AXS 10-33t
Handlebar/Stem: 100mm ENVE Carbon Stem & 42cm Zipp Carbon Handlebar
Saddle: Tioga Undercover Carbon
Wheelset: Zipp 303 NSW Tubeless Rim Brake ($3,000 value)
Weight: 16.05 lbs (as pictured) GEOMETRY/FIT NOTES
This
bike came in two geometries, a Race Fit & a Performance Fit. The
Race Fit was a standard race geometry like you'd expect, but the
Performance Fit was a very unique Endurance geometry. This 55cm
Performance Fit geometry has a Stack of 590mm and a Reach of 390mm,
which is comparable to a slightly taller version of a current generation
56cm RoadMachine which has a Stack of 586, and a Reach of 390. This
makes this bike fit somewhere between a 56 and a 58cm, and we'd
recommend a rider height of 5'11" - 6'1" and bonus points if you have
slightly longer legs. FROM BMC ABOUT THE IMPEC
The BMC Impec looks like many a high-performance carbon-fiber frameset,
but underneath the paint and clear-coat, it is unlike anything ever
built. And this difference is what makes the Impec's ride so special.
The Impec took years to design, but its ride was certified virtually
out the door. Cadel Evans rode one on his victorious 2011 Tour de France
ride. His input, based on his outputs, confirmed what the BMC engineers
believed. The bike can handle the stresses of even the most demanding
racers with aplomb. Stiff, light, comfy, tracks well going down, feels
stable going up: it has the full suite of attributes everyone wants.
This is neither a molded frame, nor a typical tube-to-tube
construction. It has elements of both yet takes them to new levels. This
is because BMC's engineers realized they needed to more precisely
control fabrication processes in order to get the ride quality they were
looking for. All the tubes are made via BMC's Load Specific Weave (LSW)
process. They weave them with an eye to putting more material where
it's needed and less where it isn't. There isn't a round tube on the
bike. After the tubes are woven, the resulting carbon-fiber sleeve is
placed over a negative mold and a positive mold goes over that, with the
resin injected once this is done. The process gives shape and rigid
form and incredible compaction. The finished tubes are joined to nodes,
part of BMC's Shell Node Concept (SNC), molded two-piece ultra-light
joints that sandwich the tubes and permanently affixed with epoxy. The
whole process is automated, so that each element is precisely controlled
the same exact way each time it is created and equally precisely joined
together each time. Every frame comes out perfectly with the same exact
characteristics for its size. Please
message with any/all questions! Be sure to check out our eBay Store for
more cycling items just like this. Also, don't forget to SAVE US as a
Seller!